Yamaha XS 650 Tracker

Foto: Yahoo Japan

RRR

As the first AHRMA race of the season approached, at Roebling Road Raceway, it started to become clear that all of my race bikes were either not going to be in this hemisphere or apart and waiting for parts.  My 350 Sprint was on the boat returning from Australia.  My 250 Sprint was waiting on a piston from JE and a crankshaft from Falicon ( i.e. I hadn't started early enough).  And, my Dondolino was waiting on a camshaft  and cam followers from Italy.  I dropped a few hints, and my arch nemesis and good friend, Jason Roberts, said at the last moment, that he could loan me a motor that I could install in my 250 CRTT chassis.  He talked about either a 350 ERS motor or a 200cc Sprint motor.

Jason Roberts ERS 350 H-D Sprint.  We talked about putting this motor in my chassis

 But, when we met up at the track Fri. morning, he suggested that it would be easier to install his 250 CRTT motor which he had just picked up after being freshly rebuilt and was sitting in a box.  That way we wouldn't have to remove a motor from a chassis.  This went fairly smoothly, although we put my intake manifold and carb on his head.  I had forgotten to bring a drive chain, but Jason had a few and I found one of the right length.  I had also forgotten the shift linkage, but Al Hollingsworth came up with that.

My CRTT chassis before and after installing Jason Roberts motor

We got it buttoned up and put it on the rollers, but didn't get a pop out of it.  We pulled out the sparkplug and it was sparking like crazy.  We tried it again and not a pop.  It must be the timing, but when we checked it, the line on the rotor lined up with the mark on the stator at just the right time.  Maybe it's the mixture, so we checked the float height and lowered it.  Still, not a pop.  After a couple of calls to the engine builder, Bill Bailey, and trying on the rollers a couple of more times, we put a timing light on it and confirmed the ignition timing was 180 degrees out.  We pulled the rotor and turned it 180 degrees, and the motor started right up.  So, I slept soundly Fri. night knowing I had a running bike.

Sat., they ran three quick rounds of practice and I got out late in the first one and only got one slow lap, being gentle on a fresh motor and feeling how the six year old tires were going to act.  In the second practice, I did three laps, but it didn't want to take full throttle.  The plug looked lean, but my jets were on the boat coming back from Australia, and no one had a bigger one than I already had in my carb, so we raised the float level back.  I was a bit better in the third practice, but still not right.  Jason had a bigger float and we installed that for the race.  I never got a good fix on the gearing because my tach wasn't working for some reason.

Exiting Turn#4.  Darleen Drehmel photo

In the 250GP race, Jack Parker and Paul Germain on their DT1 Yamahas, pulled away, with Germain getting by Parker, and I ended up a distant third.

On the grid between Bobby Birdsall's CRTT H-D and Paul Germain's DT-1 Yamaha.  Jerry Masters photo

There wasn't much I could do for the 350GP race, except ride harder.  Again, Germain and Parker pulled away.  Probably on the fifth lap, I saw Parker pull off.  Then, a lap later, I saw Alex McLean (riding a Norton Manx in the 500GP class) pull off.  I finished what I thought was a distant second, but as I completed the cool off lap, was that Germain I saw on the trailer with McLean?  Yes it was.  Both Parker and Germain's motors had seized their cranks, and I had, in fact, won.  To finish first, first one must finish.

For Sun., I installed a Veglia tach that Jason had spare in place of my Smiths chronometric, and saw that I wasn't revving the motor enough.  Al Hollingsworth found that he had a modified main jet which appeared to have a little bigger hole in it than mine and we tried it for the last (of two) practice.  Though still not perfect, the bike was best yet.  I took the checkered flag and was was riding it hard into the pit-in to get a good plug chop.  Just before I chopped the motor in the pit lane, it made a bad sound and I clutched it.  Back up on the bench.  We found that the exhaust valve was barely opening and, after pulling out the rocker and pushrod and finding that they were fine, realized that the exhaust tappet had broken.  If it had happened 100 meters later, it would have been on the warm-up lap of the race.

We pulled the clutch off and the ignition rotor and removed the timing case.  There was the head of the tappet laying under the camshaft.  Al was able to remove the shank of the tappet with a magnet through the head.  Jason had several used tappets and we choose the one that looked the best and installed it.  Al and his nephew, Dave, put the timing case back together while I changed the gearbox sprocket as, now that I had a working tach, I decided that I wasn't revving it enough.  

Al Hollingsworth buttoning up after replacing the broken tappet

We got it buttoned up and put it on the rollers but, again, it didn't make a pop.  It had no spark.  We disconnected the kill button, but still no spark.  Al and Jason each had a spare coil of unknown condition and we loosely rigged up each, but still no spark.  Al had a spare stator, but the adaptor was different , so we had to take the pick-ups off and put them on Jason adaptor plate.  Still no spark.

The 250GP race was coming up, so Jason pulled his 200cc Sprint (64mm X 61mm) out of the trailer and fired it up for me to ride. 

Jason Roberts wet clutch, 4 speed 200cc Sprint.

 As I was waiting to go out on the warm-up lap, Jason noticed that it was leaking oil from the exhaust rocker cover.  He got a wrench and tightened up the bolts, but it kept leaking.  I rode the bike back to our pit and Al and Dave whipped the cover off and replaced the gasket, which was broken.  I figured that there was no way that I was going to make the start, but when I got back to pit out the '3' board was up and I was allowed to go directly to my grid position without doing a warm-up lap.  So, I started the race on a bike that I had never ridden.  Not surprisingly, I blew the start when I bogged it (4 speed) and was about last off in my wave.  It took a little while to figure out and I found the bike handled very well but seemed way over geared (no tach).  I caught a few people and ended up fifth in class and tenth overall behind a great battle between David Bourbeau and Art Farley on their tank shift H-D's.  David beat Art by 0.072 seconds.  Paul Germain had put a spare motor in his bike and won.  Jack Parker ran his 175 Yamaha and it seized a piston.

Racing Jason's 200 in Sunday's 250GP race.  Jerry Masters photo

We never did figure out why Jason's motor in my chassis had no spark.  It seems an awfully strange coincidence that the ignition failed right when the tappet broke.  But, there was no time to investigate any further.  Al Hollingsworth suggested that I ride Don's 250 CRTT in the 350GP race.  This particular bike is the last four stroke to win the Daytona Novice race when Don rode it to the win in 1968, breaking the race record Walt Fulton III set on a works Suzuki in 1966.  And, he's still racing it 46 years later.  I had the honor of racing the bike at Daytona in 2010, when Don was injured, so I knew it was a good one.

Al Hollingsworth handing Don's CRTT over to me.  Stuart Gaskins photo.  Stuart has a bunch of photos and some video from the weekend on his website:  www.premiunfuelmag.com

This time, I did get a warm-up lap, and I did a practice start when I went out.  When the flag dropped, I did get a good start and led the first lap.

On Don Hollingsworth's CRTT in Sunday's 350GP race.  Jerry Master's photo

 But, at the end of the straight starting the second lap, Paul Germain drafted by on his DT-1 Yamaha.  Game on.  Paul led most of the time, but I found that I could draft by him if I was close on the exit of the last turn onto the straight, so the bikes were pretty even on power.  Apparently, they were pretty even on chatter, too.  Everybody had been complaining about chatter in the corners all weekend and Don's bike was no exception.  The chatter in turns #1,4, and 7 was intense, until I opened the throttle.  It's hard, though, to force one's self to make that leap of faith and wack open the throttle when the wheels are off the ground and one feels he's about to crash.  On the run up to the white flag signaling the start of the last lap, we cross the finish line just about dead even but, Paul led into turn #1.  I stayed on him, got a good drive out of the last turn, and pulled out of the draft to beat him by 0.043 seconds.

This is what 0.043 seconds looks like.

 It was a great way to cap a wild weekend filled with challenges.

My great thanks to all who helped me over the weekend, but especially Jason Roberts who loaned me his 'A' motor and his 200 Sprint, and Al and Dave Hollingsworth who worked tirelessly all weekend, and Don Hollingsworth who loaned me his superb bike.

With Dick Hollingsworth

Dick (#866 long stroke, wet clutch Sprint) and Don (#950 short stroke, dry clutch Sprint) Hollingsworth play in practice.   Jerry Masters photo

Ben Schmitt's clean RD 400 Yamaha.  Ellen Lorish photo

Paul Germain checks out Ben Schmitt's aero trailer.  Ellen Lorish photo

There were a few electric bikes around.  Ellen Lorish photo

Pat Mooney's Petty Manx. Pat won Sat., but didn't ride Sun. after he crashed his Buell.  Ellen Lorish photo

There was a big Class 'C' tank shift field.  Thomas Faber's '39 H-D.   Ellen Lorish photo

Rick Panettieri came to spectate on his Laverda Jota

My two biggest fans, Darleen and Terry, came from Chippewa Falls, Wi.  Ellen Lorish photo

Entering turn #6.  Darleen Drehmel photo

Oz VI

Here's a link to a podcast of a number of interviews conducted at The Island Classic:
http://www.motopodcast.com/podcasts/MotoPod_2014-02-12.mp3

Christina Divigard 00:01:35, a sidecar passenger and logistician for the 'East Coast' Americans (THANKS, Christina)
Dave Johnson 00:20:30, An Aussie who raced the Paton at P.I. and has raced many times at the IOM TT
Dave Roper 00:39:50, some old guy who won't go away
John McGuinness 00:57:33, winner of 20 IOM TTs, second only to Joey Dunlop
Kerry Smith 01:29:27, Jersey Girl, who raced a Team Giannini CB350 Honda at the Island Classic
Kurt Lentz 01:45:34, AMA expert roadracer in the '70s & '80s; owner and tuner of a TZ750 raced at P.I.
Levi Day 02:03:59, a 20 year old Aussie up and comer who flies on Jerry Kooistra's incredibly fast CB77 Honda
Mike Edwards 02:20:19, a British veteran who's road raced just about every type of bike available
Ottis Lance and Deano Swims 02:37:12, Co-captains of the U.S. International Challenge team at P.I.
Rex Wolfenden 03:13:55, an Aussie builder and tuner responsible for the T-Rex Hondas
Scott Clough 03:31:41, an American engine builder responsible for Dave Crussell's very fast bikes
Trevor Birrell 03:46:44, Aussie owner and sponsor of some of the bike in the International Challenge at P.I.
Simon Crafar 04:09:25, a Kiwi former World Superbike and 500 GP rider and winner of '98 British GP at Donnington park

Oz V

Here's a link to a video that Don Lange sent me of my slight indiscretion at MG corner of Phillip Island:

http://vimeo.com/87045406
The video was shot by Lars Larson.
I was totally unhurt thanks, in part, to my brand new Vanson Leathers.  They're barely scuffed.  And, as one can see, my Arai helmet never touched the ground.  I just had to get the shift lever welded up and remove the broken pieces of windscreen, and I was ready for the next race that afternoon.

Early '80s Daytona

A couple of people have recently sent me photos from the 'Good Ol' Days'.
Mike Gontesky sent me this photo that Sam Blanton took at Daytona I'm guessing 1983:

That's the late Karen Hornbecker  and, on the extreme left, Sandy McPherson, two of the angels of road racing.  Sandy's still at it.

Steve Sanders took these from a trip to Daytona with Team Obsolete:

Dick Mann wrenches on the front wheel while chatting with Frenchie Arnaud, a friend of T/O and brilliant machinist.

I don't know who the fellow on the right is.

I look like I've been caught in the act.

My 350 Sprint between two Matchless G-50s with an AJS 7r behind.  I believe that's that's Kurt Liebman in the foreground and John Wiman on the left.  That looks like my brother Doug who I'm talking too.  This is 1984 and probably at Roebling Road before Daytona.

Frenchie and John Wiman chat while Kurt Liebman looks on.

On the grid with Kurt Liebman, OLS BMW, Marco Polo, T/O G-50, and Phil Mahood, T/O 500 Triumph 7 Mar., '84

This is me riding a Ducati TT1 (well, oversized TT2, 706cc) in the BoTT race on the Tri-oval at Daytona passing a nasty oil spill.  I finished 5th, 9 March, 1984.

Rob Iannucci.  I'm not sure why he has the champagne as I certainly didn't win anything that year.

Bill Burke sent me this photo which I'm guessing is 1985:

On the pre-grid with G-50 1709.  I believe that's Rob Iannucci talking with Bob Barker on the left, Don Blair with his back to us and Linda Swanson on the right.  My guess is that this is from '85 as the G-50 fairing has all the stickers form the '84 TT.

Oz IV

Kenny Cummings has an excellent write-up of our trip on his blog:
http://nycnorton.com/phillip-island-2014/
Highly recommended.

Oz III

One more photo.  After the racing Sunday, we had dinner in the same Italian restaurant we had eaten in Thurs. night.  Most of the British International Challenge team happened to be there, too.  We had a brief chat with the master, John McGuiness.  He figured I would be retired by now.  Fat chance.

Photo by Kenny Cummings